Technologies

• HFS - HYDRO FORMING SYSTEM

  ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

  

  Close
• INTERNAL CABLE ROUTING

  On most frames, transmission and brake cables and hoses are routed through the frame. Cables enter and exit the frame through smooth sockets or one of the other systems is used, such as SMART ENTRY or WIRE PORT. Routing cables inside the frame protects them from the elements, provides a clean and sleek look, and can offer aerodynamic benefits.

  

  Close
• LONG FENDER

  An optional extra coverage mudguard that bolts rigidly to the back end of our bikes, protecting the rider from dirt and water spray while reducing noise, movement and prevent damage to the paintwork.

  

  Close
• P-FLEX

  A suspension design where the traditional pivot point on the seat stay is eliminated in favour of a flexstay design. This uses the compliance of the material and specific shaping of the tubes to allow for the seat and chain stays to move apart as the suspension moves through the travel. By removing this pivot point at the seat and chain stay junction, we save weight, reduce maintenance needs and add stiffness to the frame structure.

  Close
• PROLITE 66 TRIPLE BUTTED ALUMINUM

  The proven high-end 6066 aluminium alloy is extremely lightweight and durable. By using tubes with three times the wall thickness of drawn and hydroformed tubes, we are able to achieve an optimum stiffness-to-weight ratio.

  

  Close
• SMOOTH WELDING

  This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

  Close
• WIRE PORT

  MERIDA designed headsets that enable all control cables from the handlebar to enter the frame through the headset cover, creating a clean and uncluttered look, allowing for a lighter, stronger and more aerodynamic frame structure than with conventional cable ports. Depending on the model, the cables are run completely internally (including the bar and stem) or semi-integrated, where the cables enter the frame underneath the stem.

  Close
• X-TAPER HEADTUBE

  Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

  

  Close

Technical description

• Frame
  
  ONE-TWENTY LITE V; 130 mm suspension travel; material: aluminium; 29x2.5" max. wheelsize; 148x12 mm axle standard; BSA bottom bracket standard
• Fork
  
  Suntour XCR34 2CR; Air; 130 mm suspension travel; Tapered; lockout 44 mm fork offset; 29x2.4" max. wheelsize
• Front travel
  
  130 mm
• Rear shock-absorber
  
  SR Suntour Edge Plus 2CR lockout
• Rear derailleur (rear shifter)
  
  Shimano CUES U6000 GS
• Gear change
  
  Shimano SL-MT500-L / Shimano CUES U6000
• front brake
  
  Shimano MT200 2 piston, rotor Shimano RT10 180 mm
• Rear brake
  
  Shimano MT200 2 piston, rotor Shimano RT10 180 mm
• Crank
  
  MERIDA Expert TR; 32 teeth; 170 mm on all sizes
• Headset
  
  Acros ICR MERIDA EXTERNAL neck; Upper and lower IPS sealing
• Cartridge
  
  Shimano CUES LG400; 11-48 teeth; 10 speed
• Chain
  
  Shimano LG500
• Handlebars
  
  MERIDA COMP TR; material: aluminium; 780 mm width; 20 mm rise
• Stem
  
  MERIDA EXPERT TR; material: aluminium; 35 mm diameter; 0° stem angle; 40 mm
• Seatpost
  
  MERIDA EXPERT TR II; Diameter: 34.9 mm; Setback: 0 mm; Travel: 150 mm XSHORT/SHORT, 170 mm MID, 200 mm LONG/XLONG
• Saddle
  
  MERIDA COMP SL V-mount
• Grips
  
  MERIDA COMP EC
• Front hub
  
  Shimano TC500-B; 110x15 mm width front hub; 32 spoke holes; Centerlock
• Rear hub
  
  Shimano TC500-HM-B, 148x12 mm width rear hub; 32 spoke holes; Centerlock
• Rims
  
  MERIDA COMP CC II; 25 mm inner width; material: aluminium; tubeless ready
• Tires
  
  F: Maxxis Rekon 29x2.4" wire; R: Maxxis Rekon; 29x2.4"; wire
• Wheel size
  
  29"
• Weight
  
  15,7 kg weighed at frame size M

Other

• Product code
  
  N25000153