ATOMIC Hawx Prime 120 S BOA

ATOMIC Hawx Prime 120 S BOA are high-performance men's all-mountain ski boots designed for advanced and sport-oriented skiers who demand precise ski control, excellent stability and firm support during dynamic skiing. With a 120 flex index, a versatile 100 mm last and the modern BOA® Fit closure system, these boots combine performance-oriented stiffness, individually adjustable comfort and technologies developed through Atomic's extensive experience in ski boot engineering. The model is designed for skiers who enjoy skiing at a fast pace, actively engage their edges and want maximum control over their skis without requiring the extreme stiffness of dedicated racing boots. Compared with models featuring a 130 flex, the Hawx Prime 120 S BOA offer a slightly more accessible flex pattern that makes forward flexion easier and allows skiers to combine aggressive performance skiing with more comfortable all-day use.

One of the model's key advantages is the combination of Prolite construction, a durable polyurethane shell and the BOA® H+i1 Single Pull closure system, which creates a stable connection between the foot and the ski boot. Prolite construction uses strategically positioned reinforcements in the most highly stressed areas of the shell, supporting excellent strength, torsional stability and efficient energy transmission while optimizing material distribution. Instead of traditional lower buckles, the model features the modern BOA® H+i1 Single Pull system, allowing exceptionally precise and even adjustment of the lower shell through a dial mechanism. Skiers can therefore fine-tune foot retention, reduce unwanted movement inside the boot and achieve the secure contact needed for accurate ski control. The upper cuff is equipped with durable 6000-Series Aluminium Buckles and a 40mm Velcro Strap, which help provide stable shin support during performance skiing.

A high level of comfort and individual customization is provided by the premium Mimic Platinum Liner featuring Mimic, Power Ankle Lock (PAL), Fully Heat Moldable, Hawx AFS Tongue, 3D Stretch Toe Box and Dual Velcro Spoiler technologies. Its heat-moldable construction allows the liner to adapt to the anatomy of the foot, while Power Ankle Lock (PAL) provides secure stabilization around the ankle and heel. This is particularly important during carving and rapid edge transitions, when minimizing foot movement inside the shell is essential for immediate ski response. The adjustable Hawx AFS Tongue helps optimize contact around the instep and shin, while Dual Velcro Spoiler expands the adjustment possibilities at the rear of the liner. The 3D Stretch Toe Box creates a more flexible space for the toes and contributes to comfort throughout a full day on the slopes. Further customization is available through Memory Fit, which allows professional heat molding of the shell and cuff according to the skier's individual requirements.

The performance-oriented construction is complemented by Energy Backbone, Power Shift 2.0, Adaptive Fit System (AFS) Cuff and Dual-Sided Cuff Alignment, which work together to enhance stability and expand individual adjustment options. Energy Backbone reinforces the rear section of the ski boot and supports efficient power transmission under demanding loads. Power Shift 2.0 allows the forward lean of the cuff to be adjusted to 13°, 15° or 17°, making it possible to customize the skiing stance according to individual technique and preferences. Adaptive Fit System (AFS) Cuff allows adjustment around the calf, while Dual-Sided Cuff Alignment provides lateral cuff adjustment to accommodate the anatomy of the lower legs. Cantable GripWalk Grip Pads meeting the GripWalk ISO 23223 standard improve walking comfort when skis are removed. Weighing 1,981 g per boot in size 26/26.5, ATOMIC Hawx Prime 120 S BOA are an excellent choice for demanding performance skiers looking for precise, stable and individually customizable ski boots for dynamic and all-day skiing.

Who Are These Ski Boots Designed For?

ATOMIC Hawx Prime 120 S BOA are primarily intended for advanced and experienced skiers who prefer performance-oriented skiing, active carving and precise ski control at medium to high speeds. The 120 flex index provides substantial support when loading the cuff and allows efficient pressure transfer to the skis without requiring as much force as stiffer models with a 130 flex. This creates an excellent balance between performance precision and a more accessible flex response. The 100 mm last corresponds to the Medium Width / Medium Volume category and is particularly suitable for skiers with medium-width feet who require secure retention without the extremely narrow fit of racing boots.

The model will particularly appeal to skiers looking for modern performance ski boots with the precise BOA® Fit closure system and extensive individual customization options. BOA® H+i1 Single Pull allows even adjustment of the lower shell, while the Mimic Platinum Liner with Power Ankle Lock helps stabilize the heel and ankle. Memory Fit technology, the heat-moldable liner and adjustable cuff components allow the fit to be optimized and comfort to be improved during extended use.

These boots are ideal for skiers who:

• are looking for high-quality men's performance ski boots for all-mountain use

• prefer a firm 120 flex rating

• demand excellent stability during dynamic skiing

• regularly ski at medium to high speeds

• have mastered advanced carving techniques

• want precise ski control on the edges

• need quick responsiveness during changes of direction

• expect efficient power transfer to the skis

• actively apply pressure to the front of their boots

• want performance-oriented support without extreme racing stiffness

• are looking for a balanced combination of performance and comfort

• prefer a performance construction with secure foot retention

• want to minimize unwanted foot movement inside the shell

• are looking for versatile performance boots for groomed slopes

• prefer a medium-width 100 mm last

• have feet suited to the Medium Width / Medium Volume (MV) category

• want to benefit from the modern BOA® Fit System

• appreciate precise adjustment through BOA® H+i1 Single Pull

• prefer even pressure distribution across the lower shell

• want to fine-tune foot retention easily

• appreciate durable 6000-Series aluminium cuff buckles

• prefer a 40mm Velcro Strap for additional shin retention

• want a premium Mimic Platinum Liner

• need individual heat-molding capabilities

• appreciate Mimic technology for anatomical foot adaptation

• demand secure heel and ankle retention

• want to benefit from Power Ankle Lock (PAL)

• prefer the adjustable Hawx AFS Tongue

• want to customize contact around the instep and shin

• appreciate Dual Velcro Spoiler for individual liner adjustment

• require additional toe comfort through the 3D Stretch Toe Box

• want to use Memory Fit for professional shell customization

• prefer a durable polyurethane shell and cuff

• appreciate Prolite construction with strategically positioned reinforcements

• need stable rear support through Energy Backbone

• want to adjust the forward lean of the cuff

• appreciate Power Shift 2.0 with 13°, 15° and 17° settings

• need cuff adjustment to accommodate their calf shape

• want to benefit from Adaptive Fit System (AFS) Cuff

• require lateral cuff adjustment

• appreciate Dual-Sided Cuff Alignment

• prefer GripWalk soles for more comfortable walking

• use ski bindings compatible with GripWalk

• are looking for boots suitable for both performance skiing and extended all-day use

• want to develop their technique and progressively improve their skiing performance

ATOMIC Hawx Prime 120 S BOA are an excellent choice for performance skiers who want high performance, precise control and firm support while preferring a more accessible flex than the stiffest models in the Hawx Prime range. Thanks to the combination of BOA® Fit, Mimic Platinum Liner and extensive adjustment options, they provide excellent retention and control while maintaining individually customizable comfort. Beginners, less experienced recreational skiers and those who prefer very relaxed skiing may be better suited to softer models with lower flex ratings.

How Do These Ski Boots Perform on the Slopes?

On groomed slopes, ATOMIC Hawx Prime 120 S BOA provide firm support, excellent stability and exceptionally precise responsiveness when controlling the skis. The 120 flex index allows the front of the boot to be loaded during performance skiing while providing a slightly more accessible forward flex than models with a 130 flex. The polyurethane shell combined with Prolite technology creates a rigid construction that supports efficient energy transmission to the skis. The model is therefore well suited to dynamic carving, rapid turn transitions and fast skiing on firmer groomed snow, where precision, stability and reliable edge control are essential.

During carving and rapid edge transitions, the benefits of the BOA® H+i1 Single Pull system become particularly noticeable. The dial mechanism allows precise adjustment of the lower shell and creates even contact around the foot. Combined with the premium Mimic Platinum Liner and Power Ankle Lock (PAL) technology, it helps reduce unwanted heel and ankle movement. As a result, foot movements are transmitted to the skis with minimal delay, supporting more accurate turn initiation, quicker edge changes and better control during performance skiing.

At higher speeds and under intensive loads, Prolite and Energy Backbone provide the necessary structural stability. Strategically reinforced areas of the shell help resist unwanted deformation when greater forces are transmitted, while Energy Backbone supports the rigidity of the rear section of the boot. The 120 flex offers substantial support for advanced performance skiing while allowing slightly easier forward flexion than a stiffer 130 flex. This can make it a more suitable choice for skiers who want to ski dynamically throughout the day and are looking for a combination of high precision and less demanding flex characteristics.

An important advantage is the ability to customize the skiing stance using Power Shift 2.0. The forward lean of the cuff can be adjusted to 13°, 15° or 17°, with 15° being the default setting. This allows the position of the shin and the geometry of the skiing stance to be adapted to the skier's technique and anatomy. Adaptive Fit System (AFS) Cuff helps adjust the space around the calf, while Dual-Sided Cuff Alignment provides lateral cuff adjustment. Correctly adjusted geometry can contribute to a more natural stance, more efficient edge loading and improved ski control.

During all-day skiing, the combination of the Mimic Platinum Liner with Mimic, Fully Heat Moldable, Memory Fit, Hawx AFS Tongue, Dual Velcro Spoiler and 3D Stretch Toe Box technologies becomes particularly valuable. Although these are firm performance boots, their construction offers extensive individual customization options. Heat molding helps optimize the space around the foot, the adjustable tongue allows contact around the instep and shin to be refined, and the flexible toe area supports comfort during extended use. GripWalk soles also make walking without skis easier. Overall, these are high-performance all-mountain ski boots that combine sporting precision, stability and modern individual adjustment technologies with comfort suitable for demanding all-day skiing.

Understanding the Technical Specifications

Flex Index 120

A 120 flex index indicates a high level of performance-oriented stiffness, primarily intended for advanced and experienced skiers who prefer dynamic and technically accomplished skiing.

Compared with models featuring a 90, 100 or 110 flex, it provides firmer support when pressure is applied to the front of the cuff. This enables more effective pressure transmission to the skis during carving, faster turns and higher-speed skiing.

Compared with a 130 flex, however, it offers a slightly more accessible forward flex, which can be advantageous during all-day skiing or for performance skiers who do not require extreme stiffness. The actual perception of stiffness depends on body weight, strength, temperature and boot construction. Flex ratings are also not uniformly standardized across manufacturers.

100 mm Last – Medium Width / MV

ATOMIC Hawx Prime 120 S BOA feature a nominal 100 mm last width, corresponding to the Medium Width / Medium Volume category.

This width is particularly suitable for performance skiers with medium-width feet who require secure retention while maintaining sufficient room for individual customization.

Combined with the BOA® Fit system, Memory Fit technology and the heat-moldable Mimic Platinum Liner, it allows contact between the foot and shell to be optimized. The 100 mm measurement is nominal, and the actual last width varies according to shell size. Instep height, heel shape and overall foot volume should also be considered when selecting the correct fit.

BOA® H+i1 Single Pull Closure System

BOA® H+i1 Single Pull is a modern closure system for the lower section of the ski boot, replacing traditional lower buckles with a dial-operated mechanism.

Turning the dial allows the shell to be tightened gradually and precisely around the foot. The system provides accurate adjustment of foot retention and promotes more even pressure distribution.

During performance skiing, secure foot positioning helps improve contact between the foot and boot while reducing unwanted movement inside the shell. The upper cuff remains equipped with traditional 6000-Series Aluminium Buckles.

Weight 1,981 g / Size 26–26.5

The manufacturer specifies a weight of 1,981 g per boot in size 26/26.5.

The actual weight may vary depending on the specific boot size. The stated figure is primarily intended as a reference for comparing different models.

Considering the 120 flex index, polyurethane construction and BOA® Fit system, the model offers an appealing combination of performance-oriented rigidity and efficient material utilization. Prolite technology contributes to this construction by strategically reinforcing the most highly stressed areas.

Forward Lean 13°, 15° and 17° – Power Shift 2.0

Power Shift 2.0 technology allows the forward lean of the cuff to be adjusted to 13°, 15° or 17°.

The default setting is 15°. Changing the angle allows the shin position and overall skiing stance geometry to be adjusted.

The 13° setting creates a more upright position, while 17° provides a more pronounced forward lean. The optimal setting depends on the skier's anatomy, technique and preferences. Adjustments are best performed professionally, ideally as part of a specialist bootfitting service.

Ramp Angle 4°

Ramp Angle 4° refers to the structural inclination of the foot area inside the ski boot.

Together with the forward lean of the cuff, it influences lower-leg positioning and the way pressure is transmitted during skiing.

The overall feel of the skiing stance also depends on the skier's anatomy, ski construction and bindings. A 4° ramp angle should therefore not be considered a universally ideal setting for every skier.

Sizes 25/25.5–31/31.5

ATOMIC Hawx Prime 120 S BOA are available in Mondopoint sizes 25/25.5 to 31/31.5.

This size range provides options for adult skiers with different foot lengths and corresponds to the performance-oriented character of the model.

When choosing the correct size, it is important to consider not only foot length but also width, instep height and heel volume. Even extensive heat-molding capabilities cannot compensate for an incorrectly selected shell size.

Technologies and Construction

Prolite

Prolite is an Atomic construction technology based on efficient material distribution and strategic reinforcement of the most important areas of the shell.

Its purpose is to create a strong and stable structure without unnecessary material in areas where additional reinforcement is not required.

In the Hawx Prime 120 S BOA, Prolite helps combine the performance-oriented stiffness of a 120 flex with efficient energy transmission and balanced weight. Together with the polyurethane shell, it supports precise responsiveness during dynamic skiing.

Memory Fit

Memory Fit allows professional heat customization of the shell and cuff according to the individual anatomy of the foot and lower leg.

During the specialist fitting process, the material is heated and subsequently adjusted to meet the skier's specific requirements. This allows selected areas to be optimized where the standard shell shape does not provide sufficient space.

This technology is particularly valuable in performance ski boots with a 120 flex because it helps maintain secure retention while reducing unwanted pressure points. Memory Fit significantly expands the possibilities for individual bootfitting.

Hawx Geometry

Hawx Geometry refers to the structural geometry of Atomic Hawx ski boots, influencing foot positioning, lower-leg alignment and the transmission of movement to the skis.

Properly designed shell and cuff geometry supports a stable skiing stance and efficient pressure management throughout each turn.

In the Hawx Prime 120 S BOA, it is combined with a medium-width 100 mm last, performance-oriented stiffness and the adjustable Power Shift 2.0 system. The result is a precise and powerful boot character with extensive customization options.

Mimic Platinum Liner

Mimic Platinum Liner is a premium Atomic liner designed to provide excellent foot stability, precise retention and individually customizable comfort.

It features Mimic technology for anatomical heat molding and the Power Ankle Lock (PAL) system, which promotes exceptionally secure ankle and heel retention.

Its construction also incorporates Fully Heat Moldable technology, the adjustable Hawx AFS Tongue, the flexible 3D Stretch Toe Box and Dual Velcro Spoiler. Thanks to this combination, Mimic Platinum Liner provides a high level of performance-oriented foot retention and extensive customization options for demanding skiers.

Mimic

Mimic is an Atomic technology that allows selected areas of the liner to be heat-molded to the individual shape of the foot.

During professional heating, the material adapts to the anatomical contours of the foot and helps retain the customized shape after cooling.

This allows contact between the foot and liner to be optimized, uncomfortable pressure points to be reduced and stable foot positioning to be supported. In firm performance ski boots, proper customization is important for both precision and comfort.

Power Ankle Lock (PAL)

Power Ankle Lock (PAL) is a technology designed to provide enhanced stabilization around the ankle and heel inside the ski boot.

Secure positioning of these areas helps minimize unwanted foot movement inside the shell, which is essential for precise energy transmission during dynamic carving and higher-speed skiing.

In the Hawx Prime 120 S BOA, Power Ankle Lock complements the premium Mimic Platinum Liner and supports a stable connection between the foot and boot. This results in more confident ski control and more accurate responsiveness under demanding loads.

Fully Heat Moldable

Fully Heat Moldable refers to the ability to heat-mold the liner according to the individual anatomy of the foot.

During professional bootfitting, the material can be customized around selected areas of the foot, particularly where comfort and retention need to be optimized.

Heat molding can help reduce uncomfortable pressure and improve contact between the foot and boot. In a performance model with a 120 flex, maintaining sufficiently secure foot retention is important, so customization should always begin with the correctly selected shell size.

Hawx AFS Tongue

Hawx AFS Tongue is an adjustable liner tongue that allows contact around the instep and front of the shin to be customized.

Correct adjustment helps optimize pressure distribution when loading the cuff and contributes to a more precise connection between the foot and ski boot.

In the Hawx Prime 120 S BOA, it is an important customization feature because the performance-oriented 120 flex generates considerable pressure on the front of the boot during dynamic skiing. The adjustable tongue helps combine firm support with more comfortable contact.

3D Stretch Toe Box

3D Stretch Toe Box is a technology that increases the flexibility of the front section of the liner around the toes.

The more elastic material allows better adaptation to individual toe shapes and supports more natural toe positioning.

In firm performance ski boots, this technology is particularly beneficial during all-day skiing because it helps maintain comfort in the forefoot area even when the heel and instep are securely retained.

Dual Velcro Spoiler

Dual Velcro Spoiler is an adjustable liner component that allows the rear section to be individually customized.

Using a hook-and-loop fastening system, the position of the spoiler can be adjusted to optimize contact between the back of the leg, the liner and the cuff.

This feature expands the possibilities for individual performance fitting and can contribute to improved comfort and more stable contact under load. The correct position depends on the skier's anatomy and preferences.

Power Shift 2.0

Power Shift 2.0 allows the forward lean of the ski boot cuff to be adjusted.

In the Hawx Prime 120 S BOA, three settings are available: 13°, 15° and 17°, with 15° being the default.

This allows the shin position and stance geometry to be adapted to individual skiing technique. The more upright 13° setting and the more pronounced 17° forward lean provide different options for optimizing a performance-oriented skiing stance.

Adaptive Fit System (AFS) Cuff

Adaptive Fit System (AFS) Cuff allows the upper section of the cuff to be adapted to different calf shapes and volumes.

A correctly adjusted cuff supports even contact with the shin and stable support under demanding loads.

In a model with a 120 flex, proper adjustment is particularly important because the firm cuff transmits substantial forces. AFS Cuff helps optimize both comfort and performance functionality.

Energy Backbone

Energy Backbone is a construction technology designed to increase the strength and stability of the rear section of the ski boot.

The reinforced area helps maintain firm support under demanding loads and promotes efficient energy transmission between the leg and ski.

In the Hawx Prime 120 S BOA, Energy Backbone contributes to excellent stability during performance carving, rapid turns and higher-speed skiing.

Dual-Sided Cuff Alignment

Dual-Sided Cuff Alignment allows lateral adjustment of the cuff position according to the anatomy of the lower leg.

Correct alignment can help achieve a more natural leg position and optimize contact between the shin and ski boot.

This feature is useful during professional bootfitting, particularly when the cuff needs to be adapted to the natural alignment of the lower legs. Adjustments should be performed by a specialist with consideration for the skier's biomechanics.

PU Shell / PU Cuff

ATOMIC Hawx Prime 120 S BOA feature a polyurethane shell and polyurethane cuff (PU Shell / PU Cuff).

Polyurethane provides strong structural support and properties suitable for high-performance ski boots, where precise responsiveness and controlled cuff flexion are essential.

Combined with Prolite and Energy Backbone technologies, it creates a stable foundation for dynamic skiing. The material also allows professional heat customization through Memory Fit.

BOA® H+i1 Single Pull

BOA® H+i1 Single Pull is a precise mechanical closure system for the lower shell, operated through a dial mechanism.

It allows progressive adjustment of pressure around the foot and promotes even pressure distribution without conventional lower buckles.

During performance skiing, it helps stabilize the foot inside the shell and supports accurate transmission of movement to the skis. The upper section of the boot uses separate aluminium buckles, allowing the lower shell and cuff retention to be adjusted independently.

6000-Series Aluminium Buckles

6000-Series Aluminium Buckles are durable aluminium buckles used to secure the ski boot cuff.

They provide firm mechanical closure and allow the level of tightness to be adjusted according to shin anatomy and the desired degree of retention.

Combined with the BOA® system in the lower shell and the 40mm Velcro Strap, they create a stable closure arrangement suitable for demanding performance skiing.

40mm Velcro Strap

40mm Velcro Strap is a 40 mm wide hook-and-loop fastening strap positioned at the top of the cuff.

It complements the aluminium buckles and helps maintain firm contact between the shin and cuff under demanding loads.

In performance boots with a 120 flex, it contributes to efficient power transmission, stable support and precise control during dynamic skiing. Its hook-and-loop closure allows the tightness to be adjusted easily according to individual preferences.

Cantable GripWalk Grip Pads / GripWalk ISO 23223

The model is equipped with Cantable GripWalk Grip Pads that comply with the GripWalk ISO 23223 standard.

Their profiled construction supports a more natural rolling movement of the foot and more comfortable walking without skis. This is particularly practical when moving around a ski resort, crossing parking areas or walking to mountain restaurants.

The term Cantable refers to the construction's potential for professional angular adjustment of the sole pads. Such modifications must be performed by qualified specialists with careful consideration of safe binding compatibility. For regular use, ski bindings compatible with the GripWalk system are required.

Technical Specifications

• Intended user: Men / Unisex

• Model series: Atomic Hawx Prime

• Model: Hawx Prime 120 S BOA

• Ski boot type: All-mountain

• Skier level: Performance / Advanced to Expert

• Flex index: 120

• Flex category: 90–120

• Last width: 100 mm

• Width category: Medium Width / Medium Volume (MV)

• Shell material: PU Shell – Polyurethane

• Cuff material: PU Cuff – Polyurethane

• Shell technologies: Prolite / Memory Fit / Hawx Geometry

• Liner: Mimic Platinum Liner

• Liner technologies: Mimic / Power Ankle Lock (PAL) / Fully Heat Moldable / Hawx AFS Tongue / 3D Stretch Toe Box / Dual Velcro Spoiler

• Heat-moldable liner: Yes

• Shell heat customization: Memory Fit

• Ankle and heel retention: Power Ankle Lock (PAL)

• Tongue construction: Hawx AFS Tongue

• Rear liner adjustment: Dual Velcro Spoiler

• Flexible toe area: 3D Stretch Toe Box

• Closure system: BOA® Fit / Aluminium Buckles

• Shell closure: BOA® H+i1 Single Pull

• Cuff closure: 6000-Series Aluminium Buckles

• Power Strap: 40mm Velcro Strap

• Cuff technologies: Power Shift 2.0 / Adaptive Fit System (AFS) Cuff / Energy Backbone / Dual-Sided Cuff Alignment

• Forward lean adjustment: Power Shift 2.0

• Forward lean: 13° / 15° / 17°

• Default forward lean: 15°

• Ramp Angle: 4°

• Rear structural support: Energy Backbone

• Calf adjustment: Adaptive Fit System (AFS) Cuff

• Lateral cuff adjustment: Dual-Sided Cuff Alignment

• Sole: Cantable GripWalk Grip Pads

• Sole standard: GripWalk ISO 23223

• Sole system: GripWalk

• Weight: 1,981 g / one boot in size 26–26.5

• Sizes: 25/25.5–31/31.5 Mondopoint

• Color: Red Tension/Black

• Manufacturer code: AE5033940

• Product code: N26000961

Why Choose ATOMIC Hawx Prime 120 S BOA?

ATOMIC Hawx Prime 120 S BOA are an ideal choice for advanced and demanding performance skiers who require excellent stability, precise ski control and efficient energy transmission during dynamic skiing. The 120 flex index provides firm support during carving, rapid edge transitions and intensive loading while offering a more accessible forward flex than stiffer models with a 130 flex. The medium-width 100 mm last allows performance-oriented foot retention without requiring extremely narrow racing boots. The modern BOA® H+i1 Single Pull system provides exceptionally precise adjustment of the lower shell, while 6000-Series aluminium buckles and the 40mm Velcro Strap support stable contact between the shin and cuff.

A major advantage is the premium Mimic Platinum Liner featuring Mimic, Power Ankle Lock, Fully Heat Moldable, Hawx AFS Tongue, Dual Velcro Spoiler and 3D Stretch Toe Box technologies, which offers secure foot positioning and extensive individual customization options. Memory Fit allows professional heat molding of the shell and cuff, while Prolite creates an efficiently reinforced structure suitable for demanding performance loads. Energy Backbone further supports the stability of the rear section of the boot and helps maintain precise responsiveness during dynamic skiing. Thanks to these technologies, the Hawx Prime 120 S BOA provide an excellent combination of high performance, secure retention and individually adjustable comfort.

Another advantage is Power Shift 2.0 with adjustable forward lean settings of 13°, 15° and 17°, allowing the skiing stance to be customized according to individual requirements. Adaptive Fit System (AFS) Cuff and Dual-Sided Cuff Alignment expand the possibilities for adjusting the cuff to the anatomy of the lower leg. Cantable GripWalk Grip Pads improve walking comfort without skis and complement the model's versatile all-mountain character. The result is a technically advanced performance ski boot offering high stiffness, precise control, a modern closure system and extensive customization possibilities for demanding all-day skiing.

ATOMIC Hawx Prime 120 S BOA are premium men's all-mountain ski boots combining a 120 flex index, a medium-width 100 mm last, the innovative BOA® H+i1 Single Pull closure system, 6000-Series Aluminium Buckles, a 40mm Velcro Strap, Prolite construction, Memory Fit technology, the premium Mimic Platinum Liner with Power Ankle Lock, the adjustable Hawx AFS Tongue, Dual Velcro Spoiler, the flexible 3D Stretch Toe Box, Power Shift 2.0 with adjustable cuff forward lean, Energy Backbone and AFS Cuff technologies, and GripWalk soles. They provide firm performance support, exceptionally precise power transmission, individually customizable comfort and excellent stability for advanced skiers who want to maximize the potential of their skis during dynamic skiing while maintaining comfort throughout the entire day on the slopes.