Technologies

• CASTED MOTOR BRACKET

  The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.

  Close
• C-MOUNT

  Similar to  F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

  Close
• DI2 READY

  Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

  

  Close
• F-MOUNT

  Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

  Close
• HFS - HYDRO FORMING SYSTEM

  ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

  

  Close
• INTERNAL CABLE ROUTING

  On most frames, transmission and brake cables and hoses are routed through the frame. Cables enter and exit the frame through smooth sockets or one of the other systems is used, such as SMART ENTRY or WIRE PORT. Routing cables inside the frame protects them from the elements, provides a clean and sleek look, and can offer aerodynamic benefits.

  

  Close
• K-MOUNT

  When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of the bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

  Close
• RACELITE 61 ALUMINIUM

  A minimum of 6061 grade aluminum is used on all wheels. It lends itself particularly well to hydroforming and technoforming processes that allow the wall thickness to be varied to achieve twin tube and complex frame shapes. It is also an alloy that is easy to weld and once it has been carefully heat treated to maximize strength, it means that strong and light bicycle frames can be created that you will enjoy.

  Close
• SMOOTH WELDING

  This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

  Close
• WIRE PORT

  MERIDA designed headsets that enable all control cables from the handlebar to enter the frame through the headset cover, creating a clean and uncluttered look, allowing for a lighter, stronger and more aerodynamic frame structure than with conventional cable ports. Depending on the model, the cables are run completely internally (including the bar and stem) or semi-integrated, where the cables enter the frame underneath the stem.

  Close
• X-TAPER HEADTUBE

  Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

  

  Close

Technical description

• FRAME
  
  eSPRESSO CC LITE III; MAT aluminium; 27,5x2,25" max. WHS; 135x9 AST; internal
• Fork
  
  Suntour MOBIE A32 ; Coil; 75 STR; lockout; 27,5x2,4" max WHS
• Engine
  
  Shimano EP6; 85Nm
• Switch
  
  Shimano SW-EN600-L
• Battery
  
  Simplo Internal Battery Gen 2; 750Wh
• Displey
  
  Shimano SC-EN610
• Rear derailleur (rear shifter)
  
  Shimano CUES U6000 ; GS
• Gear change
  
  Shimano CUES U6000
• front brake
  
  Shimano MT410-3A; 2 piston
• Rear brake
  
  Shimano MT410-3A; 2 piston
• Rotor-F
  
  Shimano RT30; 180 mm
• Rotor-R
  
  Shimano RTEM300; 180 mm
• Crank
  
  Samox NWP203 ; 38 ATC
• Cartridge
  
  Shimano LG400; 11-50 ATC; 11 speed
• Chain
  
  Shimano LG500
• Seatpost
  
  JD-SP79; 30.9 DSP; 15 SSB; 40 SST
• Saddle
  
  MERIDA EXPERT TK II; V-mount
• Front hub
  
  Shimano TC500; 100x15 WHF; 32 SPH; Centerlock
• Rear hub
  
  Shimano QC300; 135x9 WHR; 36 SPH; Centerlock
• Rims
  
  MERIDA COMP TK; 20 IWR; MAT aluminium
• Tires
  
  Maxxis Crossmark II; 27.5x2.25"; wire; reflecting line
• Wheel size
  
  27.5 "
• Luggage carrier
  
  Yes
• Mudguards
  
  Yes
• Lock
  
  Yes
• Stand
  
  Yes
• Chain cover
  
  Sunnywheel SW-CG-173A

Other

• Product code
  
  N24002149