Technologies

• C-MOUNT

  Similar to  F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

  Close
• F-MOUNT

  Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

  Close
• HFS - HYDRO FORMING SYSTEM

  ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

  

  Close
• INTERNAL CABLE ROUTING

  On most frames, transmission and brake cables and hoses are routed through the frame. Cables enter and exit the frame through smooth sockets or one of the other systems is used, such as SMART ENTRY or WIRE PORT. Routing cables inside the frame protects them from the elements, provides a clean and sleek look, and can offer aerodynamic benefits.

  

  Close
• K-MOUNT

  When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of the bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

  Close
• PROLITE 66 TRIPLE BUTTED ALUMINUM

  The proven high-end 6066 aluminium alloy is extremely lightweight and durable. By using tubes with three times the wall thickness of drawn and hydroformed tubes, we are able to achieve an optimum stiffness-to-weight ratio.

  

  Close
• SMOOTH WELDING

  This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

  Close
• WIRE PORT

  MERIDA designed headsets that enable all control cables from the handlebar to enter the frame through the headset cover, creating a clean and uncluttered look, allowing for a lighter, stronger and more aerodynamic frame structure than with conventional cable ports. Depending on the model, the cables are run completely internally (including the bar and stem) or semi-integrated, where the cables enter the frame underneath the stem.

  Close
• X-TAPER HEADTUBE

  Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

  

  Close

Technical description

• Frame
  
  eSPEEDER LITE II; material: aluminium; 700x45C / 700x42C (with fender) / 27,5x47C max. wheelsize; 100x9/135x9mm axle standard; BSA bottom bracket standard
• Fork
  
  MERIDA Mission CX; carbon; max. 700x40C (with fender) wheelsize
• Engine
  
  Mahle X30
• Switch
  
  Mahle iWoc ONE
• Battery
  
  Mahle 250 Wh integrated
• Front derailleur (front Shifter)
  
  Shimano 105 R7100
• Rear derailleur (rear shifter)
  
  Shimano 105 R7100 GS
• front brake
  
  Shimano 105 R7100 2 piston; rotor Shimano RT64 160 mm
• Rear brake
  
  Shimano 105 R7100 2 piston; rotor Shimano RT66 160 mm
• Crank
  
  Shimano 105 R7100; 52-36 teeth; 170 mm-XS/S/SM/ML, 175 mm-L/XL
• Bottom bracket
  
  Shimano BSA
• Headset
  
  MERIDA 8158
• Pedals
  
  VP VPE-891
• Cartridge
  
  Shimano 105; 11-36 teeth; 12 speed
• Chain
  
  Shimano M7100
• Handlebars
  
  MERIDA Expert CW; material: aluminium; 400mm (XS/S), 420mm (M/L), 440 (XL)
• Stem
  
  MERIDA TEAM CC III; material: aluminium; 31.8mm diameter; -6° stem angle; 80 mm- XS, 90 mm-S, 100 mm-M, 110 mm-L/XL
• Seatpost
  
  MERIDA EXPERT CC; material: carbon; 30.9mm diameter; 0mm setback
• Saddle
  
  MERIDA EXPERT SL V-mount
• Grips
  
  MERIDA ROAD EXPERT
• Front hub
  
  Shimano HB-TC500; 100x12mm width front hub; 28 spoke holes; Centerlock
• Rims
  
  MERIDA Expert SL; 17mm inner width; 22mm height aluminium; Tubeless ready (tubeless tape and valves not included)
• Tires
  
  Maxxis Pursuer 700x32C fold
• Front light
  
  CG-119PG-BLACK(1)
• Tail light
  
  CG-404RG-BLK
• Weight
  
  12,2 kg weighed at frame size M

Other

• Product code
  
  N25000145