Technologies

• CASTED MOTOR BRACKET

  The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.

  Close
• C-MOUNT

  Similar to  F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

  Close
• DI2 READY

  Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

  

  Close
• ENERGY GUARD TWIST

  A two-component battery cover fitted to bikes with an internally mounted battery. It protects the battery from dirt and moisture, with a softer outer layer that absorbs impacts. An easy-to-use twist lock mechanism secures the cover in place without the need for tools with a simple and light action that makes it easy to access the battery for off-bike charging, but prevents the cover from falling off, even when riding on the roughest terrain.

  Close
• F-MOUNT

  Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

  Close
• HFS - HYDRO FORMING SYSTEM

  ‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

  

  Close
• INTERNAL CABLE ROUTING

  On most frames, transmission and brake cables and hoses are routed through the frame. Cables enter and exit the frame through smooth sockets or one of the other systems is used, such as SMART ENTRY or WIRE PORT. Routing cables inside the frame protects them from the elements, provides a clean and sleek look, and can offer aerodynamic benefits.

  

  Close
• K-MOUNT

  When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of the bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

  Close
• PROLITE 66 TRIPLE BUTTED ALUMINUM

  The proven high-end 6066 aluminium alloy is extremely lightweight and durable. By using tubes with three times the wall thickness of drawn and hydroformed tubes, we are able to achieve an optimum stiffness-to-weight ratio.

  

  Close
• SMART ENTRY

  Lines, bovdens and brake lines are clamped in a taut state to prevent them from knocking on trails or worse roads. All inlets are completely interchangeable to handle Di2, hydraulic lines, cables, bowdens, etc.

  

  Close
• SMOOTH WELDING

  This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

  Close
• X-TAPER HEADTUBE

  Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

  

  Close

Technical description

• Frame
  
  eBIG.TOUR LITE IV; MAT aluminium; 29x2.35" without fender max./ 29"x2.25" with fender max. WHS; 148x12 AST; intube
• Fork
  
  Suntour XCM34-Boost LOR DS; 100mm; Tapered; 51mm fork offset; 29x2.4" max WHS
• Front travel
  
  100 mm
• Engine
  
  Shimano EP6 85Nm
• Battery
  
  Trendpower Internal Battery 750Wh
• Rear derailleur (rear shifter)
  
  Shimano CUES U6000 ; GS
• Gear change
  
  Shimano CUES U6000 ; GS
• front brake
  
  Shimano MT-200; 2 piston, rotor Shimano RT30; 180 mm
• Rear brake
  
  Shimano MT-200; 2 piston, rotor Shimano RTEM300; 180 mm
• Crank
  
  Shimano CRE70-B; 34 ATC
• Headset
  
  MERIDA 8157
• Pedals
  
  VP VPE-537
• Cartridge
  
  Shimano LG300; 11-48 ATC; 10 speed
• Chain
  
  Shimano LG500
• Handlebars
  
  MERIDA MERIDA EXPERT TR II; 760 mm width; 18 mm rise
• Stem
  
  MERIDA EXPERT eTRII; material: aluminium; 35 mm diameter; 0° stem angle; GoPro & Supernova mount; 50 mm all sizes
• Seatpost
  
  MERIDA EXPERT CC; material: aluminium; 34.9 mm diameter; 0 mm setback
• Saddle
  
  MERIDA COMP SL V-mount
• Grips
  
  MERIDA EXPERT EC
• Front hub
  
  Shimano TC500-B; 110x15 WHF; 32 SPH; Centerlock
• Rear hub
  
  Shimano TC500-HM-B; 148x12 WHR; 36 SPH; Centerlock
• Rims
  
  MERIDA COMP CC II; 25 mm inner width; material: aluminium
• Tires
  
  Maxxis Ikon; 29x2.2"; kevlar bead
• Front light
  
  Chance Good 119PG
• Tail light
  
  Chance Good 404RG
• Wheel size
  
  29"
• Stand
  
  Massload CL-KA98
• Weight
  
  24,1 kg weighed at frame size M
• Lock battery
  
  Abus Key

Other

• Product code
  
  N25000140