Categories
Brands
New+Skipass
Safety Information for products according to GPSR
Length of skis
Binding
-
+Free delivery (GLS) from 800,- €
?
By order under 800,- € we charge 26,- € shipping costs.
-
+
Free skipass x3
?
- Skipass Dachstein West
- Skipass Harrachov
- skipass Alpe Cimbra
ATOMIC Backland 109
ATOMIC Backland 109 are men’s/unisex skis designed for ski touring and dynamic skiing in open terrain, combining wide dimensions for improved flotation in powder with a lightweight construction also focused on efficiency during the ascent. With a waist width of 109–110 mm depending on length, they belong among the wider touring models in the Backland range, and their specifications clearly point towards use away from groomed slopes. The supplied information also highlights a lighter construction with a reduced environmental impact.
The construction is based on Ultra Light Woodcore, a lightweight wood core complemented by HRZN 3D Backland, FreeTour Profile, Directional Shape, Fiberglass and Dura Cap Sidewall technologies. The model uses a Powder Rocker 25/55/20 profile and a Glossy Topsheet surface finish. The combination of a wide waist and Powder Rocker corresponds with the focus on powder and deep snow, while the technical description explicitly identifies the model as intended for Touring.
The dimensions vary depending on length. The 176 cm version measures 133.5-109-122.5 mm, the 184 cm version 135-109.5-124 mm, and the longest 189 cm version 136-110-125 mm. As the ski gets longer, the tip, waist and tail dimensions gradually increase. The turn radius starts at 17.5 m for the 176 cm length, increases to 19 m at 184 cm and reaches 20 m at 189 cm, meaning all available versions fall within the long-radius category above 17 m according to the product classification.
According to the product classification, ATOMIC Backland 109 are supplied without bindings. This allows the skier to choose an appropriate ski touring binding according to the intended use, ski boots and requirements for the complete touring setup. No specific recommended binding or its technical specifications are provided in the supplied information, so we do not add them without an additional source.
Who are these skis designed for
ATOMIC Backland 109 are primarily designed for skiers looking for wide touring skis for dynamic skiing in open terrain, powder and ski touring adventures. The character of the model is primarily defined by its 109–110 mm waist, Powder Rocker 25/55/20, Ultra Light Woodcore and construction elements focused on freeride touring.
The model is particularly suitable for skiers who:
are looking for men’s/unisex skis for ski touring
head into open mountain terrain
want a model focused on dynamic skiing away from groomed slopes
are looking for skis suitable for powder and deep snow
require improved flotation in powder
want to combine downhill use with efficiency while ski touring
are looking for wide skis with a 109–110 mm waist
prefer Powder Rocker 25/55/20
want Ultra Light Woodcore
are looking for construction featuring HRZN 3D Backland
want FreeTour Profile
prefer Directional Shape
are looking for a construction complemented by Fiberglass
prefer Dura Cap Sidewall
want to choose from 176 / 184 / 189 cm lengths
prefer long turn radii from 17.5 to 20 m
want skis supplied without bindings
want the option to choose ski touring bindings separately according to their own requirements
Backland 109 combine wide dimensions, Powder Rocker 25/55/20, Ultra Light Woodcore, HRZN 3D Backland, FreeTour Profile and Directional Shape with a clear focus on Touring and open terrain. The 109–110 mm waist depending on length and the product’s focus on improved flotation in powder position this model primarily as a wide ski for ski touring and skiing away from groomed slopes.
How the skis perform
ATOMIC Backland 109 use a Powder Rocker 25/55/20 profile. The supplied information states this designation directly but does not explain the exact meaning of the individual values or their units. We therefore do not interpret them as a specific percentage or length distribution of the profile without an additional source. Combined with a 109–110 mm waist, the model is designed, according to the product description, to provide improved flotation in powder.
The turn radius varies by length from 17.5 to 20 m. The 176 cm version has a 17.5 m radius, the 184 cm length 19 m, and the longest 189 cm version 20 m. According to the product classification, all available lengths therefore belong to the long-radius category above 17 m.
Directional Shape together with FreeTour Profile and HRZN 3D Backland are additional characteristic elements of the model. The technical description explicitly states its intended use as Touring, while the introductory product information highlights dynamic skiing in open terrain, improved flotation in powder and greater efficiency while ski touring. However, the source does not provide a detailed description of how the individual technologies behave in specific snow conditions or skiing situations, so we do not add further unsupported characteristics.
How to read the specifications
Dimensions 133.5-109-122.5 to 136-110-125 mm
The dimensions of ATOMIC Backland 109 vary by length:
176 cm – 133.5-109-122.5 mm
184 cm – 135-109.5-124 mm
189 cm – 136-110-125 mm
The waist width is therefore 109 mm at 176 cm, 109.5 mm at 184 cm and 110 mm at 189 cm. All versions correspond with the product classification placing the width under the binding in the 100–135 mm category.
Turn radius 17.5–20 m
The turn radius is specified separately for each length:
176 cm – 17.5 m
184 cm – 19 m
189 cm – 20 m
All three versions have a radius greater than 17 m and therefore correspond with the product classification Long (over 17 m).
Lengths 176–189 cm
The model is available in 176, 184 and 189 cm lengths.
The specific length should be selected according to the skier’s height, weight, skiing ability, experience, preferred terrain and requirements for the complete ski touring setup.
Weight 1540 g / 184 cm
The technical description specifies a weight of 1540 g for the 184 cm length.
However, the supplied information does not specify whether this value refers to one ski or a pair. We therefore do not add this information without an additional verified source. Separate weight figures are not provided for the 176 and 189 cm lengths.
Powder Rocker 25/55/20
ATOMIC Backland 109 use a Powder Rocker 25/55/20 profile.
This designation is stated directly in both the technology list and the technical description. However, the supplied information does not explain the individual 25/55/20 values or their units, so we do not convert them into a specific percentage or length distribution of the profile without an additional source.
Technologies and construction
Ultra Light Woodcore
The ATOMIC Backland 109 are built around Ultra Light Woodcore, a lightweight wood core.
This designation is stated directly in the technical description, while the technology list uses the very similar spelling “ULTRALITE WOODCORE”. Both source entries therefore refer to a lightweight wood core, although the specific wood species, their arrangement and the exact core construction are not stated in the supplied information. We therefore do not add these details without an additional source.
HRZN 3D Backland
ATOMIC Backland 109 use HRZN 3D Backland technology.
This designation appears consistently in both the technology list and the technical construction description. However, the supplied information does not provide a more detailed construction description or specific dimensions for this technology, so we do not expand its characteristics beyond the information provided.
FreeTour Profile
The model uses FreeTour Profile.
This technology is listed both in the technology section and in the technical construction description. The supplied information associates it with a model intended for Touring but does not provide further specific parameters for the profile. We therefore do not add details about its exact construction without an additional source.
Directional Shape
ATOMIC Backland 109 feature Directional Shape.
This construction feature is listed directly in both the technology section and the technical description. However, the available information does not provide specific dimensions or a detailed construction explanation of Directional Shape for this model, so we do not add further unsupported characteristics.
Fiberglass
According to the supplied information, Fiberglass is also part of the construction.
The technical description does not specify the exact placement, quantity or orientation of the fiberglass. We therefore do not add specific claims about its effect on flex, torsional stiffness or other skiing characteristics without an additional source.
Dura Cap Sidewall
ATOMIC Backland 109 use Dura Cap Sidewall construction.
This technology is listed in both the technology section and the technical construction description. However, the exact material composition and construction of the sidewalls are not described in greater detail in the supplied information, so we do not add characteristics beyond the manufacturer’s designation.
Glossy Topsheet
According to the technical description, the model features a Glossy Topsheet.
This is the designation of the top surface finish listed directly among the construction elements. Further material or functional characteristics of this layer are not specified in the supplied information.
Edge angles
The technical description specifies the following factory values:
Side Edge Angle: 87°
Base Edge Angle: 1.3°
Standard Edge
These values describe the edge angles stated by the manufacturer in the technical information. No further specifications regarding the construction, material or dimensions of the edges are provided.
Carbon Footprint Reduction –26%
The additional features include Carbon Footprint Reduction –26%.
However, the source does not specify the calculation methodology, reference product or baseline against which the 26% reduction is measured. We therefore retain the manufacturer’s stated figure without further interpretation or unsupported explanation.
Technical specifications
Intended for: men / unisex
Intended use: Touring
Focus according to product description: ski touring / open terrain / powder
Lengths: 176 / 184 / 189 cm
Dimensions 176 cm: 133.5-109-122.5 mm
Dimensions 184 cm: 135-109.5-124 mm
Dimensions 189 cm: 136-110-125 mm
Waist width: 109 / 109.5 / 110 mm depending on length
Turn radius: 17.5 m (176 cm) / 19 m (184 cm) / 20 m (189 cm)
Weight: 1540 g / 184 cm
Rocker: Powder Rocker 25/55/20
Core: Ultra Light Woodcore
Construction: HRZN 3D Backland / FreeTour Profile / Directional Shape / Fiberglass / Dura Cap Sidewall
Topsheet: Glossy Topsheet
Side Edge Angle: 87°
Base Edge Angle: 1.3°
Edges: Standard Edge
Bindings included: no
Carbon Footprint Reduction: –26% according to the supplied technical information
Colour: Bright Silver/Black
Manufacturer code: AA0030972
Product code: N26000994
Why choose ATOMIC Backland 109?
ATOMIC Backland 109 make particular sense for skiers looking for wide and lightweight touring skis for dynamic skiing in open terrain, powder and ski touring adventures. The 109–110 mm waist depending on length, Powder Rocker 25/55/20, Ultra Light Woodcore, HRZN 3D Backland, FreeTour Profile and Directional Shape create a combination of specifications focused on touring use and deep snow.
The model is available in three lengths of 176, 184 and 189 cm with long turn radii from 17.5 to 20 m and is supplied without bindings, allowing the complete ski touring setup to be configured according to the skier’s individual requirements. For the 184 cm length, the technical information specifies a weight of 1540 g, although it does not state whether this refers to one ski or a pair. The technical information also includes Carbon Footprint Reduction –26%, for which the source does not provide further methodological details.
ATOMIC Backland 109 are wide men’s/unisex touring skis with a 109–110 mm waist, Powder Rocker 25/55/20, Ultra Light Woodcore, HRZN 3D Backland, FreeTour Profile and Directional Shape, designed for ski touring, dynamic skiing in open terrain and powder.
Procut classification
| For whom: | Men's/Unisex |
| Core type: | Wooden core |
| Ski width under bindings: | 100 - 135mm |
| Radius: | Long (over 17 m) |
| Including binding: | No |
Documents
Technologies
-
BASE EDGE ANGLE: 1.3°
This ski features a 1.3° base edge angle for easy turning, edge grip and tracking through the turn.
-
DIRECTIONAL SHAPE
Minimal tail rocker for more edge contact creating better grip and stability.
-
DURA CAP SIDEWALL
A sidewall from the base to the top sheet of the ski enables controlled power transmission and excellent edge grip.
The rounded Dura Cap shape makes the ski significantly more durable, as it is less prone to scratches.
-
FIBERGLASS
Thanks to continuous fiberglass layers, the ski is harmonious and stable to ride, while at the same time it scores with low weight and high dynamics.
- FREE TOUR PROFILE
-
GLOSSY TOPSHEET
A glossy topsheet gives your ski a polished, glassy finish for a super-sleek high-end look.
-
HRZN 3D BACKLAND
HRZN 3D features a broader, uniquely beveled three-dimensional tip and increases surface area to create a ski that floats better in powder and improves ski handling in variable conditions. Utilizing a thinner, almost see-through, perforated material in its construction, HRZN 3D also reduces the swing weight of the ski for easier, faster, more powerful skiing. HRZN 3D seamlessly integrates into the Dura Cap sidewall making for a hyper-responsive tip-to- sidewall-to-edge connection with added durability.
-
POWDER ROCKER 25/55/20
Pronounced tip and tail rocker combined with camber underfoot for deep and variable snow.
-
SIDE EDGE ANGLE: 87°
- Precisely tuned edges are an important part of ski performance.
- A dull edge cannot penetrate the snow surface and will skid through a turn.
- An edge that is too sharp will grab and catch th snow surface creating unstable performance.
- Our skis are prepared with a slide edge angle of 87.0° for more intuitive handling, easier skiing and better grip on hard snow and ice.
-
STANDARD EDGE
0,8° = base bevel
87° = side edge angle -
ULTRALITE WOODCORE
The core is made of ultralight wood (Poplar/Caruba), which ensures a really light ski that you will appreciate especially when climbing.
Technical description
-
Weight
1540g / 184cm -
Rocker
Powder Rocker 25/55/20 -
Core
Ultra Light Woodcore -
Construction
HRZN 3D Backland, FreeTour Profile, Directional Shape, Fiberglass, Dura Cap Sidewall, Glossy Topsheet -
Additional Features
Carbon Footprint Reduction* -26% -
Parameters
176cm-133.5-109-122.5, 184cm-135-109.5-124, 189cm-136-110-125 -
radius
17.5m/176cm, 19m/184cm, 20m/189cm -
Length
176-184-189 cm -
Ski Angle
Side Edge Angle: 87°, Base Edge Angle: 1.3°, Standard Edge -
Color
Bright Silver/Black -
Intended for
Touring -
Product code
AA0030972
Other
-
Product code
N26000994
Customers also bought
61,- €
This website uses cookies
Some are necessary for the functioning of the website, others we use for statistical evaluation, for marketing purposes, eventually cookies may be set by third party providers. Consent to the use of other cookies than necessary for the functioning of the website, is voluntary. Click the button „I agree!“ all cookies are activated. Your choice of optional categories of cookies you can change it at any time in Edit settings. You can find more information in our Privacy Notice.
More information
Privacy Notice