Technologies

• 3D.Glass

  3D.GLASS is Völkl’s latest development to furthermore improve overall ski performance and stability even in critical snow conditions. Compared to classic glass constructions the three-dimensional and multiple-folded glass layers in the binding area result in an increased edge grip and a more vivid rebound behavior in turns.

  Compared to classic glass constructions the three-dimensional and multiple-folded glass layers in the tip and in the tail area result in an increased edge grip and a more vivid rebound behavior in turns. 1 3D.GLASS IS INTEGRATED IN THE TIP AND TAIL OF THE SKI // flat glass under the binding making the center softer // variable turning at any speed 2 GLASS ABOVE THE SIDEWALL //providing additional support for superior edge grip on icy slopes 3 VERTICAL GLASS IN TIP & TAIL AREA //more pop for faster edge to edge changes

  Close
• Full Sidewall ABS

  ABS is a durable and resilient plastic known for its strength and impact resistance. It offers high resistance to shocks and impacts, making the ski more robust and long-lasting. These sidewalls allow for precise power transfer from the skier to the edges of the ski.

  Close
• Multilayer Woodcore

  The side wall is laminated to extremely stable layers of wood on the sides of the sandwich core. In combination with a more flexible, lighter wood built into the center of the sandwich core construction provides numerous advantages: The hardwood part immediately adjacent to the sidewall effects a higher power transmission, improves the edge grip and supports the edge against external forces. The low weight of the softwood part in the middle of the ski brings more agility and maneuverability and reduces overall ski weight. The combination of both wood types running through the entire ski length contributes to an optimal distribution of the ski stiffness increasing the steering precision. It is the first and only sidewall/core technology intended for aggressive on-piste and racing use and capable of delivering the victory and defeat, even if it is measured in hundredths of seconds.

  Close
• P-Tex 2100

  P-Tex 2100 - high-quality sintered base. It uses polyethylene balls pressed into one large and solid block, from which thin strips are then cut off. This results in a very hard substrate that is relatively porous and easily accepts wax, especially after many applications. This provides an easier adjustment between the hardness of the snow and the hardness of the wax.

  Close
• Tailored Carbon Tips

  The carbon fibres applied using the Tailored Fibre Placement process (TFP for short) allow optimum control of cornering behaviour. The thickness and orientation of the fibres define the required force and energy build-up exactly where it is needed.

  In this innovative manufacturing process the new Tailored Carbon Tips are produced by embroidering the individual carbon fibers onto a carrier material. This allows them to be positioned exactly along the stress lines, opening up completely new possibilities, for performance at the front of the ski, which has a decisive influence on the handling of the ski. The stiffness, torsion and thus the skiing characteristics can be specifically adjusted via the fiber thickness and millimeter-precise alignment. In this way, the fibers guide the dynamics to the areas of the ski where they are needed. The visibly integrated Tailored Carbon Tips are light, allow an agile shovel reaction with less effort and quickly build up energy. The Tailored Carbon Tips thus reach a new level of precision, direct tip response and active skiing pleasure.

  Close
• Titanal Band

  The Titanal Band technology absorbs hard shocks reliably, delivers stability and yet saves on unnecessary weight.

  Close
• Zebra Structure

  Engineered for ultimate on-piste precision, Zebra Structure features a deep, high-definition base pattern tailored to narrower, system-mounted skis. This aggressive structure delivers lightning-fast, reliable turn initiation and smooth, controlled drifting for maximum carving performance.

  Close
• Vmotion 3 GW

Technical description

• Weight
  
  2850 g / 165cm (w/binding)
• Core
  
  Mulitlayer Woodcore Poplar / Beech
• Construction
  
  Tailored Carbon Tip, Full Sidewall ABS
• Reinforcement
  
  3D.Glass, Titanal Band
• Plate
  
  vMotion 3
• Parameters
  
  124-69-103
• radius
  
  10.2m/148cm, 10.9m/153cm, 11.8m/158cm, 13m/165cm, 14.4m/172cm
• Length
  
  148-153-158-165-172 cm
• Base
  
  P-Tex 2100, Zebra Structure
• Intended for
  
  Race - Groomers - Hard Snow - Piste
• Recommended binding
  
  vMotion 12 90mm GW
• Product code
  
  V2610009.000

Other

• Product code
  
  N26000672