Tecnica Mach1 LV 120 TD2 GW

TrendTip+Skipass
GPSR
grip_walk.jpg
Size table

How to Correctly Choose the Size of Ski Boot:

Stand with your back to the wall and slide the heel to the wall. Precisely measure the length of the foot in cm (heel to toe). Enter the size to "FOOT SIZE IN CM" field. In "BOOT SIZE IN CM" field choose your required size of boot. The size must be given in cm to one decimal place.
!!! The selected boot size should be about 0.3 - 1 cm longer than the measured foot size.

In case you have a higher instep or wide leg, write us a note in a shopping cart or contact us (by email [email protected]) and we will help you to choose the appropriate size or another type of boot.

 

 

Size chart:Adults:
Mondo2323,52424,52525,52626,52727,52828,52929,53030,53131,532
EU3636,5373838,53940414242,54344454646,5474848,549
UK3,544,555,5677,588,599,510,51111,5121313,514
Color
Boot size
Compare Season:2025-2026 Add to cart

TECNICA Mach1 LV 120 TD2 GW

The TECNICA Mach1 LV 120 TD2 GW is a high-performance all-mountain ski boot for athletic, advanced and highly experienced skiers looking for strong support, precise power transmission and a narrow Low Volume fit. The combination of a 120 flex and 98 mm last creates a performance-oriented boot for skiers with narrower feet or those who prefer a closer, more precise fit without moving into a pure race shell.

One of the key features of the model is T.DRIVE 2.0, which works with the cuff and shell construction to support the boot’s performance-oriented character. The Mach1 LV 120 TD2 GW also features the anatomically focused C.A.S. Shell and C.A.S. Liner technologies, allowing particular attention to be paid to the final fit. The performance construction is complemented by four micro-adjustable aluminium buckles with Lift Lock, a 45 mm Velcro strap and ISO 23223 GripWalk soles.

The Performance – Ecodesigned C.A.S. liner features Celliant® and an Adjustable Tongue, while the PU shell incorporates Power Frame and Single Quick Instep. The result is a technically sophisticated ski boot focused on precision and performance while also offering professional bootfitting possibilities and practical everyday usability.

Who are these ski boots for?

According to the official product classification, the TECNICA Mach1 LV 120 TD2 GW is a men’s/unisex all-mountain ski boot for athletic and race-oriented skiers. The 120 flex provides substantial support, while remaining somewhat more accessible for full days of performance skiing than the stiffest race-oriented models.

The model is particularly suitable for skiers who:

  • have advanced to very strong skiing technique
  • prefer an athletic and dynamic skiing style
  • want the substantial support of a 120 flex
  • have narrower feet or prefer a precise Low Volume fit
  • are looking for a narrow 98 mm shell
  • require precise retention from four micro-adjustable buckles
  • want to take advantage of C.A.S. Shell and C.A.S. Liner customization possibilities
  • appreciate the performance-oriented response of T.DRIVE 2.0
  • want GripWalk soles for more comfortable walking away from the skis
  • are looking for a performance boot suitable for intensive full-day skiing

Because of its 98 mm shell, correctly assessing foot shape and volume is particularly important with this model. For skiers with significantly wider feet, the Low Volume construction may be too restrictive, while narrower feet can benefit from more precise retention and closer contact with the shell.

How do the boots perform on the slopes?

The Mach1 LV 120 TD2 GW is built primarily around precision, support and efficient transmission of movement. A 120 flex provides a firm platform for athletic skiing, quick edge transitions and active pressure management without reaching the extreme stiffness of the most demanding race-oriented models.

The narrow 98 mm shell keeps the foot closer to the structure of the boot and limits unnecessary internal movement. For skiers whose foot anatomy matches this shape, that means more precise contact with the boot and more direct transmission of movements to the skis.

T.DRIVE 2.0 also plays an important role, working as part of the cuff and shell construction. Together with the firm performance geometry, it contributes to consistent support under active loading and a performance-oriented response during dynamic skiing.

How to understand the parameters

Flex 120

The exact flex index of 120 matches the performance focus of the model and its official classification in the 120-and-above category. It represents a high level of stiffness suitable for experienced skiers who can actively load the boot and make use of the support it provides.

A 120 flex creates substantial resistance in forward flexion, helping with precise pressure management and dynamic ski control. Compared with softer recreational boots, it requires more strength and technique but provides noticeably stronger support during athletic skiing.

Flex indices are not completely standardized between manufacturers. The value of 120 should therefore be considered together with the skier’s weight and strength, technical ability, skiing style and the overall construction of the boot.

98 mm last – Low Volume

The 98 mm last confirms the Low Volume character of the model. This is a narrow performance fit designed primarily for narrower feet or skiers who prefer a close wrap with minimal unnecessary space inside the boot.

In a performance ski boot, closer contact between the foot, liner and shell can improve control over the movement of the boot. At the same time, narrower does not automatically mean better – the 98 mm construction must match the anatomy of the individual skier’s foot.

When choosing this model, it is therefore important to consider not only width but also heel shape, instep height, overall foot volume and how the foot sits inside the boot. Professional bootfitting can be particularly beneficial with this type of performance-oriented Low Volume boot.

Technologies

C.A.S. Liner

C.A.S. Liner is a liner technology focused on precise fit and further individual adaptation. In a performance Low Volume model, correct foot positioning is especially important because it directly influences both comfort and the quality of movement transmission into the shell.

The Mach1 LV 120 TD2 GW uses a Performance – Ecodesigned C.A.S. liner with Celliant® and an Adjustable Tongue. However, the supplied information does not specify the exact range or process of C.A.S. Liner modification, so unsupported customization methods or values should not be assumed.

C.A.S. Shell

C.A.S. Shell expands the possibilities for adapting the shell to the anatomy of the individual foot. This is particularly valuable in a narrow 98 mm model when the skier wants to retain a precise performance fit while addressing localized pressure or specific aspects of foot shape.

Professional bootfitting can help optimize the final fit. The supplied information does not specify the exact range or method of shell modification, so the technology should not be associated with unsupported adjustment procedures or values.

Celliant & Lambswool

The Celliant & Lambswool technology is listed by the manufacturer in connection with liner comfort and material construction. The technical description of this specific model explicitly confirms the use of Celliant®, while Lambswool is not separately specified there.

For this model, Celliant® can therefore be clearly confirmed as part of the Performance C.A.S. liner, while no specific amount or implementation of Lambswool should be claimed beyond the official technology name. The supplied information also does not provide exact quantified performance characteristics for these materials.

Grip Walk

The model is equipped with ISO 23223 GripWalk soles designed to provide more comfortable and natural walking away from the skis. This is practical when moving around the parking area, ski resort facilities or between the slopes and lifts.

The boots must be used with ski bindings compatible with GripWalk soles.

QUICK INSTEP

QUICK INSTEP is a construction feature around the instep designed to make the ski boot easier to put on and take off. In a performance boot with a narrow 98 mm shell and 120 flex, this is particularly useful because a firmer and closer-fitting construction can otherwise make entry more demanding.

The technical description specifically lists Single Quick Instep as part of the PU shell. This is therefore the version of the concept used in the Mach1 LV 120 TD2 GW.

T.DRIVE 2.0

T.DRIVE 2.0 is one of the model’s main performance features and is integrated into the cuff construction. According to the manufacturer’s positioning, it supports consistent flex behavior and performance response, which is particularly relevant during athletic skiing and repeated dynamic loading.

The technical description confirms a Bi-Injected PP cuff with T-Drive 2.0. The system therefore works as part of the overall boot construction designed to provide firm and predictable support during active skiing.

The supplied information does not provide specific mechanical values or precisely quantified changes in flex, so such parameters should not be inferred.

DOUBLE SPOILER

DOUBLE SPOILER is a manufacturer-listed construction feature associated with the rear section of the cuff and the possibilities for working with the fit in this area of the boot.

However, the supplied information does not describe the exact mechanism, adjustment range or specific change in geometry. The technology should therefore be interpreted conservatively as a feature allowing the rear cuff configuration to be adjusted without assigning unsupported values or effects to it.

ECO DESIGN

ECO DESIGN represents Tecnica’s approach to product design with consideration for the materials used and the overall construction. In the Mach1 LV 120 TD2 GW, this concept is also directly reflected in the technical designation of the liner as Ecodesigned C.A.S.

The supplied information does not specify a particular percentage of recycled materials or quantify the environmental benefit of this model, so such figures should not be added.

LIFT LOCK BUCKLES

LIFT LOCK BUCKLES relates to the buckle construction and more practical handling when putting the boots on and taking them off. The technical specifications confirm that the model uses four micro-adjustable aluminium buckles with Lift Lock.

In addition to the confirmed number and material, micro adjustment allows the tension of each buckle to be fine-tuned. This is particularly important with a narrow performance shell, where precise adjustment helps optimize foot and cuff retention.

MATERIAL TRACIABILITY PROGRAM

MATERIAL TRACIABILITY PROGRAM is a manufacturer-listed program associated with the identification and traceability of materials used during production. It forms part of Tecnica’s broader approach to materials and the product life cycle.

The available information does not specify particular percentages, certifications or precisely quantified results of the program for this model. Its significance should therefore not be expanded beyond the information provided by the manufacturer.

C.A.S. PU shell with Power Frame

The shell is specified as C.A.S. PU With Power Frame And Single Quick Instep. Its foundation is a PU – polyurethane construction complemented by C.A.S. Shell, Power Frame and Single Quick Instep.

Power Frame forms part of the shell construction and fits the performance-oriented positioning of the model. Since the supplied information does not describe its exact mechanism, geometry or specific effect, unsupported technical characteristics should not be attributed to it.

The cuff uses Bi-Injected PP with T-Drive 2.0. The manufacturer also specifies a 14.0° cuff angle, which forms part of the boot’s basic geometry and skiing stance.

Performance C.A.S. liner

The liner is specified as Performance – Ecodesigned C.A.S. With Celliant® and Adjustable Tongue. It is therefore a performance-oriented C.A.S. construction complemented by Celliant® and an adjustable tongue.

The Adjustable Tongue provides another way of working with the final fit around the instep and front of the lower leg. However, the manufacturer does not specify the exact adjustment mechanism or range in the supplied information, so specific positions or values should not be assumed.

Combined with the narrow 98 mm shell, the liner plays an important role in creating the precise Low Volume fit that defines the Mach1 LV 120 TD2 GW.

Four micro-adjustable aluminium buckles with Lift Lock

The closure system consists of four micro-adjustable aluminium buckles with Lift Lock. The classic four-buckle construction allows the retention of different areas of the shell and cuff to be managed separately, matching the precise performance character of the model.

Micro adjustment allows finer control over buckle tension, while Lift Lock makes buckle handling more convenient when putting the boots on and taking them off. In a Low Volume boot, the ability to precisely regulate closure is particularly important for finding the right balance between secure foot retention and comfort.

45 mm Velcro strap

The upper cuff is secured by a 45 mm Velcro strap, complementing the four buckles and helping stabilize the connection between the shin, tongue and cuff.

The 45 mm width provides a substantial contact area around the upper part of the boot and corresponds with its performance-oriented character. The supplied information does not specify any additional proprietary mechanism or special material construction for the strap, so unsupported properties should not be assumed.

Mach1 LV 120 TD2 GW: precise Low Volume performance without extreme race stiffness

The TECNICA Mach1 LV 120 TD2 GW combines a narrow 98 mm Low Volume shell with a high yet still versatile performance flex of 120. This makes it an attractive option for experienced skiers who want very precise contact with the boot and substantial support but do not require the stiffest race-oriented flex.

Compared with wider performance models, the LV construction provides a closer wrap around the foot, while C.A.S. Shell and C.A.S. Liner create opportunities for professional refinement of the final fit. T.DRIVE 2.0, four micro-adjustable aluminium buckles and the 45 mm strap further reinforce the performance-oriented character of the overall construction.

The manufacturer specifies a weight of 1,830 g in MP size 26.5 and a cuff angle of 14.0°. The model uses ISO 23223 GripWalk soles and comes in the Black colorway. The manufacturer code is 101C06G0-100 and the product code is N25000950.

Why choose the TECNICA Mach1 LV 120 TD2 GW?

The TECNICA Mach1 LV 120 TD2 GW is designed for experienced athletic skiers looking for a narrow 98 mm Low Volume fit, the substantial support of a 120 flex and a construction focused on precise movement transmission and dynamic skiing. This combination provides a high level of control without requiring an extremely stiff pure race model.

C.A.S. Shell and C.A.S. Liner expand the possibilities for refining the fit, T.DRIVE 2.0 supports the performance character of the construction, and four micro-adjustable aluminium buckles with Lift Lock provide precise closure. Together with the Performance C.A.S. liner, 45 mm strap, Quick Instep and GripWalk soles, the result is a technically sophisticated performance ski boot for demanding skiers who expect precision, strong support and high-quality individual fit potential from a Low Volume model.

Procut classification

For whom: Men's/Unisex
System used: GripWalk
Type of ski boots: All mountain
Type of skier: Racer, Sports
Ski boot flex index: 120-More
Boot Width: 98

Technologies

  • C.A.S. Liner
  • C.A.S. Shell
  • Celliant & Lambswool
  • Grip Walk
  • QUICK INSTEP
  • T.DRIVE 2.0
  • DOUBLE SPOILER
  • ECO DESIGN
  • LIFT LOCK BUCKLES
  • MATERIAL TRACIABILITY PROGRAM

Technical description

  • Shell
    C.A.S. PU With Power Frame And Single Quick Instep
  • Inner boot
    Performance - Ecodesigned C.A.S. With Celliant® and Adjustable Tongue
  • Flex index
    120
  • Skeleton width
    98
  • Closure system
    4 Micro Adjustable Aluminum with Lift Lock
  • Cuff Technology
    Bi-Injected PP With T-Drive 2.0
  • Power strap
    45mm Velcro
  • Weight
    1830 g (MP 26.5)
  • Forward Lean Shell Rotation
    14.0°
  • Sole
    ISO 23223 Gripwalk
  • Color
    Black
  • Product code
    101C06G0-100

Other

  • Product code
    N25000950

Customers also bought

Trend+Skipass
TrendTip
  UVP 22,- €   14,- €
+Skipass
  UVP 700,- €   531,- €
+Skipass
  UVP 620,- €   496,- €
Trend+Skipass
  UVP 95,- €   85,- €

This website uses cookies

Some are necessary for the functioning of the website, others we use for statistical evaluation, for marketing purposes, eventually cookies may be set by third party providers. Consent to the use of other cookies than necessary for the functioning of the website, is voluntary. Click the button „I agree!“ all cookies are activated. Your choice of optional categories of cookies you can change it at any time in Edit settings. You can find more information in our Privacy Notice.

Edit settings