Categories
Brands
TrendTip+Skipass
Safety Information for products according to GPSR
Color
Boot size
-
+Free delivery (GLS) from 800,- €
?
By order under 800,- € we charge 26,- € shipping costs.
-
+
Free skipass x3
?
- Skipass Dachstein West
- Skipass Harrachov
- skipass Alpe Cimbra
DALBELLO DRS 130
The DALBELLO DRS 130 are men’s/unisex race ski boots with a 130 flex and a narrow 97 mm shell, designed for highly experienced and race-oriented skiers who demand high stiffness, precise ski control and highly efficient power transfer to the edges. Their construction is directly derived from Dalbello’s race-focused boots and combines a narrow performance fit with strong support for aggressive, technically precise skiing.
The foundation is a classic two-piece OVERLAP DESIGN, which creates solid support for the foot and promotes rapid lateral power transfer toward the ski edges. The high 130 flex provides substantial support under load and matches the character of a model intended for performance and race-oriented skiing. The shell construction is also designed to maintain the required stability during flexing and help absorb unwanted vibrations.
Despite their clearly performance-driven character, the DRS 130 also offer meaningful customization options. MY FIT allows both the shell and liner to be adapted, while Contour 4™ helps create additional room in anatomically sensitive areas. The DB Comp Liner complements the precise character of the boot while also supporting thermal comfort. The result is a ski boot for demanding skiers who want race-level precision, high stiffness and the ability to fine-tune the fit to their individual foot shape.
Who are these ski boots for?
The DALBELLO DRS 130 are men’s/unisex Race ski boots intended primarily for racers and highly experienced performance skiers. The combination of a 130 flex and 97 mm shell width creates a firm, narrow and precise package focused on control and rapid response.
This is not a comfort-oriented recreational model. The narrow 97 mm shell offers less internal volume than typical all-mountain ski boots, while the 130 flex requires active technique, sufficient strength and the ability to load the boot correctly.
This model is suitable for skiers who:
- ski competitively or very aggressively
- have very good to excellent technique
- require the high stiffness of a 130 flex
- prefer a narrow 97 mm race-oriented fit
- want to minimize unwanted foot movement inside the boot
- require fast transfer of movements toward the ski edges
- expect strong lateral support
- want precise control during dynamic skiing
- are able to actively work with a stiffer shell
- appreciate shell and liner customization
- are looking for a classic OVERLAP DESIGN construction
- prefer four buckles combined with a 50 mm Power Strap
How do the ski boots perform on snow?
The DALBELLO DRS 130 are focused on rapid response, high precision and efficient power transfer to the skis. The combination of a narrow 97 mm shell and 130 flex creates a very performance-oriented character that is best exploited by technically advanced skiers.
The stiff construction provides strong support when pressure is applied into the cuff. During dynamic transitions from one turn to the next, the stable shell helps transfer lateral movements toward the ski edges without unnecessary losses caused by excessive foot movement or excessive shell deformation.
Another important part of the model’s character is Drive & Control, which supports a more precise connection between the foot, boot and ski. Together with OVERLAP DESIGN and the rigid cuff, it creates a construction focused primarily on control and response under high loads.
On snow, you can expect:
- very strong support from the 130 flex
- rapid response to skier input
- precise ski control
- efficient transfer of power to the edges
- high lateral stability
- secure foot positioning
- minimal unwanted movement inside the boot
- good control under high loads
- a race-oriented character
- high demands on technique and active skier input
How to read the parameters
Flex index 130
The exact flex index of the DALBELLO DRS 130 is 130.
Flex index provides an approximate indication of the resistance a ski boot offers when the shin presses forward against the cuff. A value of 130 belongs to the high-flex category and corresponds to a very performance-oriented to race-oriented character. The boot provides strong support and limits excessive softness in the shell, helping the skier apply pressure to the skis more precisely.
Such a high flex also requires sufficient strength, speed and proper technique. For a lighter or less experienced skier, a 130 flex may be unnecessarily demanding and can limit the ability to work effectively with the boot.
Flex 130 supports:
- strong support under load
- precise pressure control
- efficient energy transfer
- rapid boot response
- stability during dynamic skiing
- control at higher speeds
- performance and race-oriented skiing
- a more direct connection between skier and skis
Flex indexes are not completely standardized between manufacturers. When comparing different models, shell construction, boot size, temperature and the individual skier’s physical characteristics should also be taken into account.
Shell width 97 mm
The DALBELLO DRS 130 have a 97 mm shell width, corresponding to a narrow, performance- and race-oriented fit.
The lower internal volume creates closer contact between the foot, liner and shell. With the correct size and an appropriate foot shape, this helps reduce unwanted movement and speeds up the transfer of skier input toward the skis.
A narrow 97 mm shell is not ideal for every foot. Skiers with wider or higher-volume feet may need individual customization or a more suitable model with greater internal volume.
A 97 mm width supports:
- highly precise foot positioning
- strong lateral fixation
- reduced unwanted movement
- rapid response to skier input
- a more direct connection with the skis
- efficient power transfer
- a race-oriented boot character
Technologies
Contour 4™
Contour 4™ works with anatomically shaped areas of the shell and additional room in parts of the foot where increased pressure commonly occurs.
In a narrow 97 mm race-oriented boot, correct distribution of internal space is especially important. The goal is not to unnecessarily increase the overall volume of the boot, but to create appropriate room in sensitive areas while preserving the close performance fit required for precise ski control.
Contour 4™ therefore helps combine a narrow race fit with more anatomically considered shell shaping.
Drive & Control
Drive & Control is focused on more precise transfer of skier input through the boot to the ski.
In the DRS 130, it complements the stiff shell, high flex and narrow fit. Its purpose is to support controlled ski steering and efficient use of the skier’s movements, particularly during dynamic skiing and rapid transitions from edge to edge.
The result is a construction focused on control, precision and direct response.
Grip Walk Option
Grip Walk Option refers to the possibility of using an appropriate GripWalk solution.
GripWalk is a sole system designed to make walking without skis more natural and comfortable. However, the supplied information does not confirm that every specific pair of DRS 130 boots is equipped with GripWalk soles as standard.
If GripWalk soles are fitted, the boots must be used with GripWalk-compatible bindings. Before use, it is therefore important to verify the actual sole type on the specific pair and confirm compatibility with the binding.
Micro Alu Bucles
Micro Alu Bucles refers to the buckle system used on the DRS 130. The boots use four buckles, allowing the shell to be closed firmly and precisely.
On a race-oriented model, proper buckle adjustment is important for stable foot positioning and efficient transfer of movement. The goal is not simply maximum tightening, but even fixation that keeps the foot in the correct position.
MY FIT
MY FIT allows individual customization of both the shell and the liner.
This is particularly important in a 97 mm race-oriented construction. A precise fit requires close contact, but it should not create excessive pressure in problematic areas. Customization helps adapt the boot to the individual anatomy of the foot and find the right balance between fixation, precision and comfort.
MY FIT therefore helps maintain the sporty character of the boot while addressing the specific requirements of the individual skier.
Adjustable Rear Cuff Spoiler
Adjustable Rear Cuff Spoiler allows the rear section of the cuff to be adjusted via an adjustable spoiler.
Changing this area can help fine-tune the contact between the leg and cuff according to the skier’s individual preferences. In a performance- and race-oriented boot, correct contact around the cuff is important for a stable stance and precise pressure management.
EXTRA WIDE POWERSTRAP
EXTRA WIDE POWERSTRAP complements the traditional buckle closure with a wide upper strap.
On the DALBELLO DRS 130, the Power Strap is 50 mm wide. It helps secure the upper cuff around the lower leg and creates more stable contact around the shin. This supports more precise loading of the boot and complements the firm four-buckle construction.
LOCKED CUFF
LOCKED CUFF matches the performance focus of the model by providing firm and stable support in the cuff area.
The rigid character of this part of the construction supports precise response under load and helps maintain the stability required for dynamic and race-oriented skiing. In a 130-flex model, it contributes to the overall focus on control and efficient power transfer.
OVERLAP DESIGN
OVERLAP DESIGN is the classic two-piece ski boot construction that forms the basis of the performance character of the DRS 130.
The load-bearing shell made from a firm material provides strong support and promotes rapid lateral power transfer toward the ski edges. The construction is designed to maintain the necessary stability during flexing, reduce unwanted shell deformation and at the same time help damp vibrations.
For a race-oriented skier, this primarily means more precise boot response and a more direct connection between leg movement and ski reaction.
Race-oriented OVERLAP DESIGN construction
The DALBELLO DRS 130 are built around a two-piece Overlap construction focused on strong support, precise control and rapid power transfer.
Under load, the shell must handle high forces without excessive deformation because structural stability is essential for accurate ski response. The firm load-bearing shell supports lateral transfer toward the edges while also helping absorb vibrations that could otherwise interfere with the skier’s contact with the skis.
Combined with a 130 flex and 97 mm width, this construction creates a clearly performance-oriented to race-oriented character. It is therefore not simply a stiff boot, but a complete system designed to give an experienced skier a solid platform for precise and dynamic ski control.
The model uses four buckles and a 50 mm Power Strap, while the supplied weight is 2.26 kg. The manufacturer code is D2002002.00, the product code is N20003267, and the model is from the 2022/2023 season.
DB Comp Liner
The DALBELLO DRS 130 are equipped with a DB Comp Liner, which matches the performance-oriented character of the model.
Its purpose is to create a stable connection between the foot and the firm shell so that the skier’s movements can be efficiently transferred to the skis. In a 97 mm boot, precise wrapping of the foot is particularly important for reducing unwanted movement and maintaining rapid response.
According to the supplied information, the updated liner construction also contributes to thermal comfort. Together with MY FIT, it can be adapted more closely to the individual shape of the foot.
Four buckles and 50 mm Power Strap
The DALBELLO DRS 130 use four buckles combined with a 50 mm Power Strap.
The four-buckle closure allows different areas of the foot and cuff to be securely held, while the wide upper strap helps create a firmer connection between the shin and upper part of the boot.
With a 130-flex model, correct closure adjustment is essential. The goal is not simply to tighten the boot as much as possible, but to create even contact that stabilizes the foot while allowing the skier to make effective use of the shell stiffness during dynamic skiing.
MY FIT and individual customization
A race-oriented fit does not mean a skier must simply accept unsuitable pressure points. This is why MY FIT is particularly important on the DRS 130, as it allows both the shell and liner to be customized.
Combined with Contour 4™, the boot can be adapted more effectively to the individual anatomy of the foot. The goal of customization is not to turn a 97 mm boot into a wide comfort model. Instead, the aim is to preserve the precise character and firm fixation while adjusting problematic areas so that the boot fits the individual skier correctly.
For getting the maximum potential from such a narrow and stiff boot, professional bootfitting is especially worthwhile.
Narrow 97 mm fit and 130 flex
The combination of a 97 mm shell and 130 flex is one of the defining characteristics of the DALBELLO DRS 130.
The narrow construction limits the space available for unwanted foot movement, while the high flex provides a firm platform for applying pressure. The result is very direct response, allowing an experienced skier to transfer movements quickly to the skis.
The same characteristics also mean that the DRS 130 are not a universal choice for everyone. The skier needs appropriate technique, physical ability and a suitable foot shape in order to take full advantage of such a precise construction.
Comparison with wider performance ski boots
Compared with performance all-mountain ski boots around 100–102 mm wide, the DALBELLO DRS 130 provide a significantly tighter and more precise fit thanks to the 97 mm shell.
The lower internal volume reduces unwanted foot movement and supports faster transfer of movements toward the edges. For a racer or highly experienced performance skier, this immediacy can be a major advantage.
A wider model, however, provides more room and may be better suited to a higher-volume foot or a skier who places greater emphasis on comfort. The DRS 130 are therefore intended primarily for skiers who deliberately want a narrow 97 mm race fit.
Comparison with softer performance ski boots
Compared with lower-flex models, the DALBELLO DRS 130 provide significantly stronger support and more direct response under high loads thanks to the 130 flex.
This is beneficial for technically advanced skiers who ski dynamically, generate high pressure through the skis and are able to actively use the stiff construction. The firmer shell helps maintain a stable platform and supports precise application of force.
A softer performance boot will be easier to flex and less physically demanding. For a skier who cannot properly load a 130 flex, more stiffness does not necessarily mean better control. The DRS 130 make the most sense when the skier’s ability and physical characteristics match their race-oriented nature.
Why choose the DALBELLO DRS 130?
The DALBELLO DRS 130 are designed for demanding and race-oriented skiers looking for narrow, very stiff and precise Race ski boots with a 130 flex and 97 mm shell width. Their main strength is the direct connection between the foot and the skis, strong support under load and a construction focused on rapid power transfer toward the edges.
OVERLAP DESIGN provides the firm structural foundation, while Drive & Control supports precision and control. MY FIT together with Contour 4™ allows the performance fit to be adapted more effectively to the individual foot anatomy, while the DB Comp Liner adds precise foot positioning and thermal comfort. Four buckles, the 50 mm EXTRA WIDE POWERSTRAP, LOCKED CUFF and Adjustable Rear Cuff Spoiler complete the performance-focused package.
For a highly experienced skier or racer who can fully use the 130 flex, narrow 97 mm shell and race-oriented construction, the DALBELLO DRS 130 are a highly precise tool for dynamic skiing with an emphasis on control, rapid response and efficient power transfer to the skis.
Procut classification
| For whom: | Men's/Unisex |
| Type of ski boots: | Race |
| Type of skier: | Racer |
| Ski boot flex index: | 120-More |
| Boot Width: | 97 |
Documents
Technologies
-
Contour 4™
CONTOUR 4 ™
Exceptional Dalbello design technology that copies the anatomical contours of the foot inside the lower skeleton: the ankle, the heel, the fifth metatarsal, and the bark. The shoes exactly fit and minimize the need for individual skeleton adjustment.Contour 4 embodies all the comfort, precision and control of narrower shoes for performance skiing. Shoes designed for the highest performances have never been so comfortable.
-
Drive & Control
Drive& Control is an evolution of C4 which has been engineered to provide the perfect blend of rear foot control with a relaxed toe box.
Comfort Zone
More volume for more comfort. Better blood circulation & warmth. More fun & longer skier time.
Wrapping zone
Precise heel retention. Proper wrapping. Reduce play for full control & direct transmission.
-
Grip Walk Option
This boot is coming with the option to mount GripWalk soles as an aftermarket accessory. GripWalk soles provide better grip, great walking comfort and work perfectly with the GripWalk binding without any height adjustment (due to their Touring ISO Norm 9523).
-
Micro Alu Bucles
A SIMPLE TURN OF BUCKLE! Through the use of micrometer buckles easy to use, will be easier to customize our boots!
-
MY FIT
The Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. As the most comprehensive fitting program, liner and shell can now be thermo customized in several levels additional to the pre-molded shell (Contour 4) which is included in every My Fit boot. To your individual specific needs of your foot - easy and quick!
-
Adjustable Rear Cuff Spoiler
Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler Permits skiers to increase rear cuff height add rear support and change forward lean.
-
EXTRA WIDE POWERSTRAP
Extra wide powerstrap increases performance and power transmission.
-
LOCKED CUFF
The locked cuff feature boosts rear support and minimizes rear cuff flex. Skiers find the boot is for more responsive, more powerful, and more precise.
-
OVERLAP DESIGN
2 Piece Architecture
For all those categories, in which a high level of power, precision and control is demanded, we built the boots with the traditional overlap construction. The architecture constists of two parts - lower shell and upper cuff - and transmits the power directly to the ski and binding. The defined flex and the traditional power-rebound enable precise control and work perfectly on groomed slopes.
Technical description
-
Inner boot
DB Comp Liner -
Flex index
130 -
Skeleton width
97 mm -
Number of buckles
4 + Power strap 50 mm -
Weight
2,26 kg -
Product code
D2002002.00
Other
-
Product code
N20003267
Customers also bought
This website uses cookies
Some are necessary for the functioning of the website, others we use for statistical evaluation, for marketing purposes, eventually cookies may be set by third party providers. Consent to the use of other cookies than necessary for the functioning of the website, is voluntary. Click the button „I agree!“ all cookies are activated. Your choice of optional categories of cookies you can change it at any time in Edit settings. You can find more information in our Privacy Notice.
More information
Privacy Notice